5005 Network Setup Wizard 5006 Warning 5007 Fatal Error 5008 Error 5009 Network Configuration 5010 Network Settings Change 5011 Component configuration file name missing in Registry 5012 Component configuration option value missing in Registry 5013 Component key missing from Configuration Registry 5021 Netcard Interrupt Request Level setting is currently in use by another device. 5022 Netcard I/O Port Address setting is currently in use by another device. 5023 Netcard Memory Buffer Address setting is currently in use by another device. 5024 Netcard DMA Channel setting is currently in use by another device. 5031 The netcard detection DLL is incomplete (export missing) 5032 No netcard detection DLLs were found 5033 Unable to obtain hardware bus info for this machine 5041 Registry access error: unable to read or create software product information 5042 Unable to load configuration rules from executable 5051 Format error in bindings storage file 5052 Bindings file specifies non-existent Registry key 5053 Primary rule base consultation error 5054 Registry rule base consultation error 5055 Binding algorithm query failed 5056 Query result parsing failure 5057 Registry component improperly installed 5058 Registry component section mismatch 5061 Warning: the attempted Domain change operation failed. \nThis machine is currently not a member of any domain. \nThe error was: \n\n 5062 Warning: the attempted Domain change operation failed. \nThis machine is currently not a member of any domain. 5071 You must shut down and restart your computer before the new settings will take effect.\n\nDo you want to restart your computer now? 5072 The attempt to restart the system failed. You should restart the system manually. 5073 The computer name entered is already in use by another computer. 5074 The domain name entered is already in use by other computers. 5081 The user name entered is not properly formatted. 5082 The computer name entered is not properly formatted. 5083 The password entered is not properly formatted. 5084 The domain name entered does not exist or is not properly formatted. 5085 The name entered is not properly formatted. 5086 The workgroup name entered is not properly formatted. 5087 The domain name entered is not properly formatted. 5091 The domain entered is not a Windows NT domain. 5092 The machine account for this computer either does not exist or is inaccessible. 5093 This computer name is already configured as a workstation or server on the domain. Please contact your domain administrator. 5094 This computer name is already configured as a domain controller on the domain. Please contact your domain administrator. 5101 WORKGROUP 5102 DOMAIN 5111 Configuration operation was cancelled by user 5112 Parameters passed from SETUP were invalid 5113 This action will permanently remove the component from the system.\nIf you wish to reinstall it, you will have to restart the system before doing so.\n\nDo you still wish to continue? 5114 Recent bindings review changes will be lost during this process.\n\nReapply them after this operation completes. 5115 Configuration operation attempt failed 5116 Bindings changes were made that may be lost if they are not saved before proceeding.\n\nDo you wish to save these changes? 5121 The domain controller for this domain cannot be located. 5122 Unable to connect to the domain controller for this domain. Either the user name or password entered is incorrect. 5123 Unable to connect to the domain controller for this domain. Have your administrator check your computer account on the domain. 5124 Unable to add or change accounts on the domain. The account information entered does not grant sufficient privilege to create or change accounts. 5125 Unable to update local security in order to join domain. 5126 You already have a connection to the domain. You must disconnect before joining the domain. 5127 The start type for the Netlogon service could not be changed. Use the Services applet to correct the problem. 5128 Attempt to change computer name failed.\n\nPlease confirm that the name is valid and that you have the access rights to change the name. 5129 Configuration Registry is currently locked by another process 5141 The domain name you entered cannot be accepted for this backup domain controller. If this domain has been renamed at the primary domain controller, enter the domain's new name. Because a domain controller cannot change domains, do not enter the name of a different domain. 5142 enter the domain's new name. Because a domain controller cannot change domains, do not enter the name of a different domain. 5143 Attempt to leave old primary domain incomplete; error was %s 5144 Failed to obtain necessary Local Security information. 5145 Cannot access service controller %s. 5151 Welcome to the %s domain. 5152 Welcome to the %s workgroup. 5153 The Computer Name has been successfully changed to %s.\n\nThis change will not take effect until the computer is restarted. 5154 Changing the computer name without the Domain Administrator first changing its name on the domain will result in domain accounts (including your own domain account) not being able to access or log on to this computer.\n\nAre you sure you want to change the computer name? 5171 Removing this computer from the %s domain will result in loss of access by domain user accounts.\n\nAre you sure you want to remove this computer from this domain? 5172 Moving this computer out of the %s domain may result in loss of access by some domain user accounts.\n\nAre you sure you want to move this computer out of this domain? 5173 Changing the domain name will require you to change the domain name on all Servers and Workstations in the domain.\n 5174 Also, any trust relationships with other domains will have to be reestablished using the User Manager for Domains.\n\nAre you sure you want to do this? 5181 Domain name cannot be the same as the machine name. 5182 Workgroup name cannot be the same as the machine name. 5191 Registry error: bad database 5192 Registry error: no such key 5193 Registry error: cannot open key 5194 Registry error: cannot access key 5195 Registry error: cannot modify key 5196 Registry error: out of memory 5201 Windows NT Networking is not installed. \n\nDo you want to install it now? 5211 The Network Wizard executable was not found. Your system is incorrectly installed and should be repaired. 5212 Your system is out of virtual memory. Please close programs and retry this operation. 5221 Initializing... 5222 Scanning adapter information... 5223 Scanning service information... 5224 Scanning drivers information... 5225 Scanning protocol information... 5226 Processing product information... 5227 Reading binding control data... 5228 Adding to binding control data... 5229 Performing binding analysis... 5230 Creating binding information... 5231 Migrating WinSock 1.1 to WinSock 2.0... 5243 Service dependency update failed. 5253 Software\Microsoft\NwlnkIpx\CurrentVersion 5261 Value not found in Configuration Registry 5262 Key not found in Configuration Registry 5271 all adapters 5272 all protocols 5273 all protocols to services 5274 all services 5275 all component connections 5291 Lana Number 5292 Network Route 5293 The LANA number of each protocol must be unique. 5294 LANA numbers must be in the range of 0 to 255 for each protocol. 5301 Hewlett-Packard Network Port 5302 Lan Adapter number information mismatch in Configuration Registry 6008 The network failed to start (%s).\n\nIf you retry you may go back and check previous settings, then when you return to this page Windows NT will try to start the network again.\n\nIf you cancel, Network Setup will be cancelled. You may retry to configure networking on this computer after completing the rest of setup by using the Network Control Panel. 6009 A required network service failed to start.\n\nPlease check previous settings, and when you return to this page Windows will try to start the network again.\n\n(%s) 6010 Either an error happened during Network Component Install or you have requested to cancel Network Setup.\n\nIf you retry you may go back and check previous settings, then when you return to this page Windows NT will try to install and copy network components again.\n\nIf you cancel, Network Setup will be cancelled. 6011 Installing %s... 6012 Copying %s... 6013 %s 6014 Storing binding configuration... 6015 %s is reviewing bindings... 6016 Please wait as the component list is being processed... 6017 Removing %s... 6018 Upgrading %s... 6019 Bindings Storing 6020 Network Setup Wizard 6021 %s If you have an installation disk for this component, click Have Disk. 6022 Click the %s that matches your hardware, and then click OK. 6023 Click the %s that you want to install, then click OK. 6024 Click the %s that you want to install, then click OK. 6025 Select %s 6026 Network Adapter 6027 Network Protocol 6028 Network Service 6029 &%s: 6030 Building %s Option List... 6031 The component you selected is already represented in the list. \n\nIf you wish to install that item, find it in the list and confirm that the item has been checked. 6032 The WinSock 1.1 to 2.0 Migration Failed (%s)\n\nBinding Review and Configuration will continue, but your networking components may not be correctly configured. 6033 The Windows NT Beta will only allow one detected adapter to be installed. All other previously detected adapters have been unchecked. 6034 The Windows NT Beta will only allow one detected adapter to be installed. Since one has already been installed, you will not be allowed to uncheck it and check another. 6035 The item you have selected has not been successfully installed.\n\nOnly installed components can be configured. 6036 While trying to remove components at least one of them returned a failure status.\n\nComponents that fail to be removed will no longer be configurable and can not be installed until they have been successfully removed. 6037 A Setup parameter specified by your system administrator or computer manufacturer is missing or invalid. Setup must therefore ask you to provide this information now. \n\nOnce you have furnished the required information, unattended Setup operation will continue. \n\nYou may wish to inform your system administrator or computer manufacturer that the "%s" value is missing or invalid. 6038 A Setup parameter specified by your system administrator or computer manufacturer is missing or invalid. Setup may therefore ask you to provide this information. \n\nYou may wish to inform your system administrator or computer manufacturer that the "%s" value is missing or invalid. 6039 The Setup parameters file specified by your system administrator or computer manufacturer is missing or invalid Setup must therefore ask you to provide this information now. \n\nYou may wish to inform your system administrator or computer manufacturer that the "%s" is missing or invalid. 6040 The Service Database is currently locked.\n\nPlease retry this operation after it has been unlocked. 6041 You do not have sufficient permissions to complete this operation. 6042 An unexpected error has happened while attempting this operation.\n\nThe operation has been canceled. 6043 Bindings Review 6044 Querying components for binding review requests... 6045 You have the following product installed on your computer: \n\n%s.\n\nWindows NT cannot upgrade this component. Please\ncontact your system administrator or look through your product\ndocumentation to make sure that this product is compatible with\nthis version of Windows NT. 6046 Network Setup Information 6047 The following software is no longer supported by this version of Windows NT: %s.\n\nThe software may continue to function correctly without updating.\n\nOtherwise, please contact Microsoft for more information. 6049 Configuration changes that have been made require that the bindings be reconfigured and reviewed.\n\nPlease close the Network Control Panel Applet before you attempt to end this session again. 6051 Windows NT automatically creates an Internet host name based on the computer name. The computer name in use is not a valid Internet host name.\n\nYou may either change the computer name to one that is also a valid Internet host name (reccommended), or retain the computer name as entered and have Windows NT create the following modified Internet host name: %s\n\nPlease note that if you elect to have Windows NT create a modified Internet host name, your computer will be known by one name on your local area network and by another name on the Internet.\n\nDo you want to change the computer name to one that is also a valid Internet host name? 6053 %s has been removed. Please install Services for Macintosh from the Services Tab in the Network Control Panel applet after the Windows NT upgrade is over.